Products Description

The Bently Nevada 330104-00-16-10-02-CN Proximity Probes are non-contact eddy current sensors designed for radial vibration and shaft displacement monitoring in rotating machinery. This model belongs to the 3300 series measurement system and is commonly installed in turbines, compressors, generators, and other high-speed equipment where vibration control is critical.
In practical industrial environments, monitoring accuracy and long-term stability are more important than theoretical performance values. This probe is engineered to operate continuously under vibration, oil exposure, and elevated temperatures. When properly matched with its extension cable and proximitor module, it forms a calibrated measurement loop capable of delivering stable and linear output signals proportional to shaft movement.
Contact Us
For pricing, availability, and ordering information regarding analog input modules, please feel free to contact our sales team. We are committed to providing rapid response, highly competitive pricing, and fast global shipping.
Our address
32D, Hubin South Road No.388, Xiamen 361009, Fujian, China
Phone Number

Technical Specifications
| Item | Specification |
|---|---|
| Model | 330104-00-16-10-02-CN |
| Product Type | Eddy Current Proximity Probe |
| Series | 3300 Series |
| Measurement Principle | Non-contact eddy current sensing |
| Measurement Range | 0–2 mm (0–80 mils), system dependent |
| Sensitivity | 7.87 V/mm (200 mV/mil) |
| Linearity | ±1% of full scale within calibrated gap |
| Resolution | ≤ 0.1 μm (system dependent) |
| Frequency Response | 0–10 kHz (depending on system configuration) |
| Output Signal | Linear DC voltage proportional to displacement |
| Cable Length Code (-02) | 2.0 meters |
| Connector Type | Compatible with 3300 system modules |
| Shielding | Double-shielded coaxial cable |
Product Advantages
Non-contact measurement eliminates mechanical friction
Stable long-term output under continuous operation
Suitable for high-speed rotating machinery
Industrial-grade construction for harsh environments
Compatible with established 3300 monitoring systems

Working Principle
The probe operates based on the eddy current effect. A high-frequency oscillating signal inside the probe generates a magnetic field at the probe tip. When a conductive metal shaft approaches this field, eddy currents are induced on the shaft surface. These induced currents alter the impedance of the probe coil.
The change in impedance results in a proportional change in output voltage. After signal conditioning by the proximitor module, the system provides a linear displacement signal corresponding to the shaft position. Because no physical contact occurs between the probe and the shaft, the sensing element does not experience mechanical wear.
Application Fields

Steam turbines
Gas turbines
Generator rotor monitoring
Compressor trains
Offshore rotating equipment
Pipeline pumping systems
Centrifugal compressors
Process pumps
Reactor drive motors
PLC Export Company Advantages
We are a professional PLC export company specializing in the global supply of industrial automation parts and control system components. With years of experience in international trade, we focus on delivering reliable automation solutions to customers in power generation, oil & gas, manufacturing, petrochemical, and process industries.
We are committed to:
Providing accurate part number verification
Supporting urgent replacement and shutdown projects
Offering competitive pricing with transparent quotations
Ensuring secure global logistics and export compliance
Delivering professional and timely communication

Installation Guide
Verify full model number and cable length before installation.
Install into compatible threaded mounting port (3/8-24 UNF).
Adjust initial probe gap according to calibration requirements.
Secure using locknut to prevent loosening under vibration.
Route cable away from high-voltage lines to reduce interference.
Hot Recommendations
|
IC693ACC302 |
IS200ECGIH1A IS200ECGIH1APR2 |
IC693PBM200 |
|
IC694MDL660 |
IS200BPIBG1A IS200BPIBG1AEB |
IC693PWR330 |
|
IC695CMX128 |
GE D20 ME |
IC693PWR321 |
|
IC693PTM101A |
AMAT 0100-11002 |
IC693MDL655 |
|
IC694MDL930 |
IS200EISBH1AAA |
IC693ALG222C |
|
IC695CHS012 |
IS2020JPDCG1ACB |
IC693CPU374 PLUS |
|
IC695ALG616 |
SAMGONG CPU KT-0120-10G |
IC693CPU364 |
|
IC695ALG508 |
IS200DSPXH1DBD |
IC693ALG392 |
|
IC695ALG312 |
GE MTL 8851-LC-MT |
IC693ALG222C |
|
IC695CPU310 |
330902-00-25-05-01-05 |
IC693MDL646 |
|
IC695PBM300 |
24701-34-05-00-031-04-02 |
IC693MDL742 |
|
IC693PWR330 |
89477-27 |
IC693CPU363-DL |
|
IC693PWR321 |
177230-01-02-CN |
IC693PWR321 |
|
IC693MDL655 |
330876-02-10-01-00 |
IC693PWR330 |
|
IC693ALG222C |
330706-005-46-10-02-00 |
HE693THM884M |
Hot Tags: bently nevada 330104-00-16-10-02-cn proximity probes, China bently nevada 330104-00-16-10-02-cn proximity probes manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05

