Product Overview
The Bently Nevada 330103-00-04-15-02-CN Proximity Probe is a non-contact displacement sensor engineered for industrial machinery monitoring. Designed for long-term stability, it provides precise gap measurement and vibration data for rotating equipment protection systems.
This probe is designed for long-term industrial operation, delivering consistent measurements with minimal calibration drift. It supports continuous monitoring and reduces maintenance frequency.
Contact Us
For detailed product inquiries, technical assistance, pricing, or after-sales support, please get in touch with us using the contact details below:
Our address
32D, Hubin South Road No.388, Xiamen 361009, Fujian, China
Phone Number
Technical Specifications
| Specification | Details |
|---|---|
| Model | 330103-00-04-10-12-CN |
| Product Series | 3300 XL |
| Probe Diameter | 8 mm |
| Measurement Range | 2.0 mm (80 mils) |
| Nominal Sensitivity | 7.87 V/mm (200 mV/mil) |
| Output Type | Negative voltage proportional to gap |
| Probe Tip Material | PPS (Polyphenylene Sulfide) |
| Body Material | Stainless Steel |
| Thread Size | M10 × 1 |
| Operating Temperature | -35 °C to +177 °C |
| Storage Temperature | -51 °C to +200 °C |
| Environmental Rating | Industrial duty |
| Mounting Method | Threaded installation |
| Interface | Compatible with 3300 XL Proximitor® |
Core Strengths
Non-contact measurement reduces wear and extends service life
High accuracy and repeatable output
Suitable for harsh industrial environments
Low drift over long operating periods
Compatible with standard 3300 XL monitoring systems
System Compatibility
This model is designed for integration with:
3300 XL extension cables
3300 XL Proximitor® sensors
Machinery protection and condition monitoring systems
This ensures smooth integration into existing monitoring architectures.
Main Applications
This probe is commonly used for:
Shaft displacement measurement
Vibration trend monitoring
Rotor position tracking
Machinery protection and alarm systems
Condition-based maintenance programs
Typical installations include turbines, pumps, compressors, and motors.
Installation and Setup
Use standard M10 threaded mounting for secure attachment
Confirm the target surface is conductive and properly aligned
Set the probe gap according to system calibration requirements
Ensure proper cable routing and strain relief to prevent signal issues
Hot Recommendations
|
84661-33 |
330730-080-02-00 |
330103-00-03-10-02-CN |
|
21000-16-10-15-144-03-02 |
HIEE300698R1 KUC321AE |
129478-01 |
|
170180-01-00 |
330704-000-050-10-01-05 |
330103-13-23-05-02-00 |
|
84152-01 ASSY83729-01 |
81545-01 |
330104-00-15-10-02-00 |
|
330106-05-30-05-02-CN |
330103-00-07-10-12-05 |
330901-11-25-10-01-00 |
|
330103-03-12-05-02-00 |
102045-040-00 |
330104-00-05-10-11-00 |
|
990-05-XX-01-CN |
330103-00-21-10-11-CN |
330930-065-03-05 |
|
128031-01C |
3500/93 135799-01 |
330104-00-05-05-02-05 |
|
330104-06-14-10-02-00 |
330104-00-11-10-01-00 |
330104-00-08-05-02-00 |
|
330103-11-19-10-02-00 |
RS901104-03-050-10-01 R200602-400808 |
21000-28-10-00-217-04-02 |
|
16710-66 |
330930-040-02-00 |
330101-00-20-15-02-05 |
|
9200-06-05-05-00 |
128718-01 |
330930-040-00-00 P3403893-0006 |
|
21747-080-00 |
330130-040-00-00 |
330101-08-20-10-02-00 |
|
3300/55-01-04-12-12-00-00-07-00 |
330101-30-63-10-02-CN |
330500-02-04 |
|
330101-30-63-15-02-CN |
330104-00-22-10-02-00 |
330180-X1-CN MOD:145004-141 |
Hot Tags: bently nevada 330103-00-04-15-02-cn proximity probe, China bently nevada 330103-00-04-15-02-cn proximity probe manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05
