
Products Description
The 330101-00-96-10-02-CN is an industrial proximity probe designed to detect dynamic shaft movement in critical rotating machinery. The sensor operates on an eddy-current principle, allowing it to monitor the distance between the probe tip and a conductive target such as a rotor surface. Changes in this distance are converted into electrical signals that can be processed by vibration monitoring equipment.
This probe is commonly used in high-reliability monitoring systems where continuous measurement of rotor behavior is necessary. Its sensing technology supports accurate detection of vibration amplitude and shaft displacement in applications where mechanical contact measurement would not be practical.
Functional Role / System Position
In a standard 3300 XL transducer chain, the probe functions as the primary sensing device installed near the rotor. It is mounted through the machine housing so that the sensing face remains close to the rotating shaft. The probe output travels through an extension cable to the Proximitor sensor module. The Proximitor then converts the signal into a conditioned voltage output that can be interpreted by monitoring or protection systems.
This arrangement allows control systems to continuously evaluate rotor condition and respond to abnormal vibration levels or shaft movement.
Key Features / Functional Capabilities
- High-resolution displacement sensing suitable for monitoring small rotor movement variations
- Contact-free measurement method eliminates probe wear and reduces maintenance frequency
- Robust probe body designed for secure mounting in industrial machine casings
- Stable electrical response across long monitoring cycles in rotating equipment environments
- Shielded coaxial signal path helps maintain measurement stability near high-power electrical equipment
- Fully interoperable with Bently Nevada vibration monitoring architectures used in machinery protection
Application Areas / Typical Use Cases
- Rotor vibration monitoring in turbine generator units
- Shaft displacement measurement in centrifugal compressors
- Dynamic monitoring of pump rotor assemblies
- Integration in rotating machinery protection systems
- Vibration supervision in heavy industrial drive equipment

Parameter Table
| Parameter | Specification |
|---|---|
| Product Model | 330101-00-96-10-02-CN |
| Series | 3300 XL 8 mm Proximity Probe |
| Thread Type | 3/8-24 UNF |
| Armor | Without armor |
| Unthreaded Length (A) | 0.0 in |
| Case Length (B) | 9.6 in |
| Total Length (C) | 1.0 m (3.3 ft) |
| Connector Type (D) | Miniature coaxial ClickLoc connector |
| Connector Protector | Not included |
| Cable Type | Standard cable |
| Agency Approval (E) | CSA / ATEX / IECEx |
| Ordering Structure | 330101-AA-BB-CC-DD-EE configuration code |
Contact Information
For pricing, availability, or technical consultation regarding this model, please contact our sales team:
【Sales Manager】
Silver
【WhatsApp】
+86-18020714492

【Email】
sales1@askplc.com
【WeChat】
+86-18020714492
FAQ
Q1: What does this probe measure in rotating machinery?
It detects shaft displacement and vibration by measuring the changing distance between the probe tip and the metallic rotor surface.
Q2: Where is the probe typically mounted?
The probe is installed through the machine casing so the sensing face points directly toward the rotating shaft.
Q3: What completes the sensing system besides the probe itself?
An extension cable and a Proximitor sensor are required to complete the proximity transducer loop.
Q4: Why is non-contact sensing used for rotor monitoring?
Because it allows precise measurement of shaft motion without introducing friction or mechanical wear.
Q5: In what types of plants is this probe commonly used?
It is widely used in power stations, petrochemical facilities, and industrial plants operating large rotating equipment.
Welcome to Inquiry Below
| HONEYWELL | MU-TLPA02 51309204-125 | ICS TRIPLEX | T8151B |
| HONEYWELL | MU-TPIX12 51304084-100 | ICS TRIPLEX | T8232 |
| HONEYWELL | MU-TSDM02 51303932-277 | ICS TRIPLEX | T8310C |
| HONEYWELL | MU-TSIM12 51303932-401 | ICS TRIPLEX | T8311 |
| HONEYWELL | MU-TSIM12 51303932-426 | ICS TRIPLEX | T8431 |
| HONEYWELL | NTDI21-A | ICS TRIPLEX | T8431C |
| HONEYWELL | R02S02L03 | ICS TRIPLEX | T8461 |
| HONEYWELL | SB3610-B | ICS TRIPLEX | T8461C |
| HONEYWELL | SC-PCMX01 51307195-175 | ICS TRIPLEX | T8461CX |
| HONEYWELL | SC-UCMX01 51307195-175 | ICS TRIPLEX | T8480 |
| HONEYWELL | SC-UCMX02 51307195-276 | ICS TRIPLEX | T8800 |
| HONEYWELL | SC-UCNN11 51307573-176 | ICS TRIPLEX | T8830 |
| HONEYWELL | SPS5710 51199929-100 | ICS TRIPLEX | T8830C |
| HONEYWELL | SPS5710-2-LF 51198685-100 | ICS TRIPLEX | T8850 |
... ... ...(MORE)
Hot Tags: bently nevada 330101-00-96-10-02-cn 3300 xl 8 mm proximity probes, China bently nevada 330101-00-96-10-02-cn 3300 xl 8 mm proximity probes manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05

