
Products Description
The Bently Nevada 102044-00-18-10-02 Proximity Probe is an eddy-current displacement sensor designed for continuous shaft vibration and position monitoring in rotating machinery. As part of the Bently Nevada proximity transducer family, the probe converts mechanical displacement into a stable electrical signal that can be interpreted by vibration monitoring systems.
Engineered for long-term operation in demanding industrial environments, this probe supports precise shaft motion detection, enabling condition monitoring and protection strategies in turbines, compressors, pumps, and other critical rotating assets.
Functional Role / System Position
Within a proximity transducer system, the probe is installed close to the rotating shaft and forms the primary sensing element. It works together with an extension cable and a Proximitor sensor to form a complete measurement loop. The probe detects microscopic shaft movement and transmits the signal through the cable to the monitoring electronics, where it is processed for vibration analysis, displacement measurement, and protection system alarms.
This sensing configuration allows control systems to track mechanical health and respond rapidly to abnormal vibration conditions.
Key Features / Functional Capabilities
- Precision eddy-current sensing technology enabling accurate measurement of shaft displacement and vibration signals
- Stable electrical characteristics supporting continuous monitoring in high-speed rotating equipment environments
- Mechanical construction designed for reliable operation under industrial vibration and thermal conditions
- Seamless compatibility with Bently Nevada proximity monitoring architectures for integrated machinery protection
- Shielded signal path that helps minimize electromagnetic interference in electrically noisy installations
- Modular probe design allowing efficient field replacement and simplified maintenance procedures
Application Areas / Typical Use Cases
- Gas and steam turbine vibration monitoring systems
- Compressor shaft displacement measurement
- Industrial pump condition monitoring platforms
- Generator rotor vibration detection
- Rotating machinery protection systems in power plants and refineries
Parameter Table
| Parameter | Specification |
|---|---|
| Product Model | 102044-00-18-10-02 |
| Sensor Type | Eddy-current probe |
| Probe Diameter | 8 mm |
| Thread | 3/8-24 UNF |
| Armor | Without armor |
| Unthreaded Length (A) | 1.8 in |
| Case Length (B) | 3.6 in |
| Total Length (C) | 1.0 m (3.3 ft) |
| Connector Type (D) | Miniature coaxial ClickLoc |
| Cable Type | Standard cable |
| Connector Protector | With protector |
| Agency Approval (E) | Not required |
Contact Information
For pricing, availability, or technical consultation regarding this model, please contact our sales team:
【Sales Manager】
Silver
【WhatsApp】
+86-18020714492

【Email】
sales1@askplc.com
【WeChat】
+86-18020714492
FAQ
Q1: What is the primary purpose of the 102044-00-18-10-02 probe?
It is used to detect shaft displacement and vibration in rotating machinery as part of a proximity monitoring system.
Q2: Does this probe operate independently?
No. It functions together with an extension cable and a Proximitor sensor to form a complete proximity transducer system.
Q3: What type of machinery typically uses this probe?
It is commonly used in turbines, compressors, pumps, and generators where continuous shaft monitoring is required.
Q4: Is the probe resistant to electrical interference?
Yes. The probe and its signal path are designed with shielding to reduce the effects of electromagnetic noise in industrial environments.
Q5: Can this probe be replaced without modifying the monitoring system?
Yes. As long as the replacement probe matches the system configuration and length requirements, it can be installed directly within the existing proximity transducer system.
Welcome to Inquiry Below
Welcome to Inquiry Below
➪ AB Series: 1756/1747/1746 Series
➪ Schneider(Schneider Electric)Series: 140 Series
➪ General electric(General Electric)Series: IC693/IC697/IC695/DS200..
➪ Westinghouse Series: 1C/5X ...
➪ Siemens: 6DD/6DP/6ES5/6DR/6GK Series
➪ Woodward: SPC valve position controller, PEAK15 digital controller
➪ Foxboro: FBM203/204/217/231, FCP240/270
➪ Bently Nevada: 3500/3300/330180-Cable..
➪ Triconex: 3008/3511/3625/3664/3721/3700A..
➪ Honeywell: 51/MU/MC/TC/CC ...
➪ ABB: Industrial robot parts of DSQC series,Bailey INFI90, DCS(AI810, DI810 PM645), S900I/O OCS(07KT97/98,07AC)
... ... ...(MORE)
Hot Tags: bently nevada 102044-00-18-10-02 proximity probes, China bently nevada 102044-00-18-10-02 proximity probes manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05

