Bently Nevada 330905-00-05-05-02-CN 3300 NSv M10×1 proximity probe
Metric 3300 NSv standard-mount proximity probe with M10×1 thread, no armor, 50 mm case, 0.5 m standard cable and miniature ClickLoc coaxial connector.
What matters when specifying 330905-00-05-05-02-CN
Exact ordered identity
Use the complete 330905-00-05-05-02-CN code; do not shorten the suffix during quotation.
Mechanical execution
330905 identifies an M10×1 standard-mount metric probe without armor.
Length configuration
00 = 0 mm unthreaded length, 05 = 50 mm case and 05 = 0.5 m total cable length.
System matching
Probe plus extension cable must equal the selected 330980 Proximitor Sensor system length.
Description and purpose
Documented purpose
330905-00-05-05-02-CN is a metric Bently Nevada 3300 NSv proximity probe used with a matched 3300 XL NSv extension cable and Proximitor Sensor for non-contact shaft position and vibration measurement. The 330905 base design is M10×1 threaded and supplied without stainless-steel armor.
Replacement caution
The current Baker Hughes ordering table uses a numeric agency-approval option, while the requested unit ends in CN. Preserve CN exactly as marked and verify the complete probe label, installed extension cable, Proximitor Sensor system length and site approval documentation before quotation or replacement.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
Bently Nevada, a Baker Hughes business
3300 XL NSv proximity-transducer family
330905-00-05-05-02-CN
Retain CN exactly as shown on the supplied label
330905
Metric standard-mount probe without armor
M10×1
17 mm locknut and 8 mm wrench flats for documented M10 probe
00
0 mm unthreaded length
05
50 mm metric case length
05
0.5 metre (20 inch) probe and integral cable length
02
Miniature coaxial ClickLoc connector with standard cable; no connector protector
75 Ω
Integral probe cable documented for 3300 NSv
5.26 mm (0.207 in)
Confirm mounting clearance and target geometry
2.8 mm (0.11 in)
Probe has no external armor
7.23 mm (0.285 in)
Allow clearance through routing and housings
−34 °C to +177 °C
For 3300 NSv probe in documented housing applications
−51 °C to +177 °C
Avoid exposing the pressure seal below the specified operating limit
330905 probe + 330930 extension cable + 330980 Proximitor Sensor
All components and total system length must match
Label / regional documentation verification required
CN is not shown as a numeric agency option in the current public ordering table
Planning a 330905-00-05-05-02-CN replacement
Full loop identity
Record the probe, extension-cable and Proximitor Sensor labels and their complete suffixes.
Length calculation
Confirm that the 0.5 m probe plus extension cable equals the 5 m or 7 m Proximitor system length.
Mechanical fit
Verify M10×1 thread, 50 mm case, mounting gap, target material and connector-routing clearance.
Commissioning
Set and verify probe gap and system output using the approved 3300 XL NSv procedure before returning the machine to service.
Applications
Radial vibration
Measures non-contact shaft vibration in a matched 3300 XL NSv transducer system.
Axial position
Supports thrust or axial-position measurement where the machine design and monitor channel permit.
Small-clearance installations
The NSv probe format supports applications requiring a compact probe-tip and connector arrangement.
Maintenance replacement
Restores a verified M10×1, 0.5 m standard-cable probe after complete loop compatibility review.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact 330905-00-05-05-02-CN in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete 330905-00-05-05-02-CN identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about 330905-00-05-05-02-CN
What is Bently Nevada 330905-00-05-05-02-CN used for?
Bently Nevada 330905-00-05-05-02-CN is a 3300 NSv proximity probe used with a matched extension cable and 330980 Proximitor Sensor to measure non-contact shaft vibration or position.
What thread does Bently Nevada 330905-00-05-05-02-CN use?
Bently Nevada 330905-00-05-05-02-CN uses an M10×1 metric case thread and is the standard-mount 330905 execution without stainless-steel armor.
What do the first two option codes mean on Bently Nevada 330905-00-05-05-02-CN?
On Bently Nevada 330905-00-05-05-02-CN, 00 specifies 0 mm unthreaded length and the following 05 specifies a 50 mm overall case length.
How long is Bently Nevada 330905-00-05-05-02-CN?
The third option code 05 on Bently Nevada 330905-00-05-05-02-CN specifies a 0.5 metre (20 inch) total probe-and-cable length.
Which connector is fitted to Bently Nevada 330905-00-05-05-02-CN?
Code 02 on Bently Nevada 330905-00-05-05-02-CN specifies a miniature coaxial ClickLoc connector with standard cable and without a connector protector.
Is Bently Nevada 330905-00-05-05-02-CN armored?
No. The 330905 base model in Bently Nevada 330905-00-05-05-02-CN is the M10×1 probe without armor; 330910 is the related M10×1 armored base model.
What extension cable is required for Bently Nevada 330905-00-05-05-02-CN?
For Bently Nevada 330905-00-05-05-02-CN, select a compatible 330930 extension cable so the 0.5 m probe plus cable equals the 330980 Proximitor Sensor system length.
What does CN mean on Bently Nevada 330905-00-05-05-02-CN?
The current public Baker Hughes ordering table does not list CN as the standard numeric agency-approval option. For Bently Nevada 330905-00-05-05-02-CN, retain CN exactly and verify its meaning from the supplied label and regional documentation.
Can Bently Nevada 330905-00-05-05-02-CN replace another 3300 NSv probe directly?
Bently Nevada 330905-00-05-05-02-CN should only replace a probe after the thread, case and unthreaded lengths, cable length, connector, Proximitor system length, approvals and machine target have all been matched.
What information is needed for a Bently Nevada 330905-00-05-05-02-CN quotation?
For Bently Nevada 330905-00-05-05-02-CN, send clear probe, extension-cable and Proximitor labels, installed gap, mounting-thread details, target material, monitor channel, quantity, destination and required condition.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete 330905-00-05-05-02-CN identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the 330905-00-05-05-02-CN host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied 330905-00-05-05-02-CN markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates 330905-00-05-05-02-CN availability, documents, order details and worldwide delivery follow-up.
Planning a 330905-00-05-05-02-CN replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: bently nevada 330905-00-05-05-02-cn 3300 nsv proximity probe, China bently nevada 330905-00-05-05-02-cn 3300 nsv proximity probe manufacturers, suppliers, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330180 51 05 manual, 330903 00 05 10 01 05 manual, 330903-00-05-10-01-05, Bently Nevada 330104 00 08 90 02 05, Bently Nevada 330180 51 05

