ABB CS513 3BSE000435R1 communication interface module
Legacy ABB Advant Controller communication interface identified as CS513 with product code 3BSE000435R1.
What matters when specifying CS513 3BSE000435R1
Complete identity
Match every character in CS513 3BSE000435R1, including suffixes and revision markings.
Installed-system basis
CS513 3BSE000435R1 compatibility depends on the documented host system, slot and wiring.
Customer selection check
Confirm product code, host Advant controller, interface medium, cables, station settings and revision.
Replacement planning
Record labels, connectors, settings and diagnostics before removing CS513 3BSE000435R1.
Description and purpose
Documented purpose
CS513 3BSE000435R1 provides a communication-interface function in a documented ABB Advant Controller installation. Network medium, companion hardware and station configuration must follow the original project documentation.
Replacement caution
Do not assume protocol, port type or cable from the CS513 family name alone. Confirm the complete label, host controller, firmware or PROM markings, cable assemblies and network drawings.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
ABB
Advant control-system hardware
CS513
Communication interface
3BSE000435R1
Primary ordering identity
Advant Controller installation
Verify exact controller and subrack
Project-document verification required
Match cable and companion equipment
Record before removal
Preserve address and network configuration
Legacy / installed-base support
Plan replacement and migration carefully
Label, revision, host, cables and settings
All must match
Planning a CS513 3BSE000435R1 replacement
Nameplate record
Photograph the complete CS513 3BSE000435R1 label and all revision markings.
Connector control
Label every plug, terminal and cable before removal; preserve keying and grounding.
Project verification
Compare the host rack, channel allocation, supply and configuration with approved drawings.
Commissioning
Use the manufacturer procedure to verify diagnostics and every affected signal or safety function.
Applications
Legacy communications
Maintains a documented Advant network interface.
Outage replacement
Supports like-for-like maintenance after configuration capture.
Network fault isolation
Allows controlled substitution after cable and peer checks.
Migration survey
Preserves interface and station data for modernization.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact CS513 3BSE000435R1 in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete CS513 3BSE000435R1 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about CS513 3BSE000435R1
What is CS513 3BSE000435R1 used for?
CS513 3BSE000435R1 is a legacy ABB Advant communication interface. Its exact duty must be confirmed against the installed-system documentation.
Which system uses CS513 3BSE000435R1?
CS513 3BSE000435R1 belongs to ABB ADVANT CONTROLLER 400. Confirm the controller, rack or remote-I/O execution before ordering.
What specifications matter when selecting CS513 3BSE000435R1?
For CS513 3BSE000435R1, verify confirm product code, host advant controller, interface medium, cables, station settings and revision. Do not select a replacement from appearance alone.
Can CS513 3BSE000435R1 replace a similar module directly?
CS513 3BSE000435R1 should only replace another unit after the full model, revision, host-system compatibility, connector arrangement and project approval have been confirmed.
Can CS513 3BSE000435R1 be removed while energized?
CS513 3BSE000435R1 must only be removed under the approved isolation, stored-energy and safety procedure for the installed system.
How should CS513 3BSE000435R1 be commissioned?
After installing CS513 3BSE000435R1, verify seating, supply, configuration and diagnostics, then function-test every affected channel under the approved procedure.
What photographs are required for CS513 3BSE000435R1?
For CS513 3BSE000435R1, provide the complete nameplate, front and side views, connector area, installed slot, adjacent hardware and terminal labels.
What should be sent for a CS513 3BSE000435R1 quotation?
Send the full CS513 3BSE000435R1 identity, revision, host system, slot, connector and wiring photographs, required condition, quantity and destination.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete CS513 3BSE000435R1 identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the CS513 3BSE000435R1 host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied CS513 3BSE000435R1 markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates CS513 3BSE000435R1 availability, documents, order details and worldwide delivery follow-up.
Planning a CS513 3BSE000435R1 replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: abb cs513 3bse000435r1 communication interface, China abb cs513 3bse000435r1 communication interface manufacturers, suppliers, 3ADT312500R0001 manual, 3AFE61002774 ABB, abb, ABB SDCS PIN 205B 3ADT312500R0001, ABB SDCS PIN 205B 3ADT312500R0001 Power Interface Board, YPK113A 3AFE61002774

